| Subject | Text |
| light bulb broke off the wires for main display | I have a 1995 RX-V850 Yamaha Stereo Rec. the through the hole light bulb that lights up the main dis |
| Blackline FX | Hello,
Many TV sets now have these screens : it is simple, you deal with a high quality picture t |
|
|
| There are two causes for this failure:
1) Faulty tube, but most of the times two colors won't dis |
| [b:da6283ee84]This Parts & Service manual can be purchased for $12.77 and downloaded immediately |
| Zenith SJ2743LK won't power on | My husband & son were playing Nintendo on this set when it suddenly shut off. No cracks or pops |
| Maybe this wire plugs onto the CRT board on the back of the tube? |
| thanks for the reply ill pop the back off of it again and give it look ..i did see a heatsinked to-2 |
| Schneider Scinema 3210 NVM Codes | Can anyone advise what are the default Schneider Scinema 3210 NVM Codes.
Service mode displays:
|
| Hi the GDM1950 requires the sync to be the correct way up whereas your card changes these depending |
| RZ2500amp | I've repaired a RZ2900 with the same problem, I replaced the output I.C STK 4152II and replaced a ze |
| re; protect | Hi, one or both of your output IC`s are shorted, the unit is telling
you that it is in "protect mod |
| Re: Electronics parts for TV VCR AUDIO closing down | I would be interested in all of your CD mech's and parts. Test cd's also. Please let me know what yo |
| Re: Audio but no Video on Philips projection tv model 8p4834 | [quote:bb4b048c59="thetechman007"]Hey There, I will try to give you a hand, If There is no filament |
| Re: TV Problem | [quote:ca5516462e="bigboy"]:D
I have a 32" Sony projection TV. Latley when I turn it on I am get |
| Have been out of consumer electronics for some time...I used to see this problem on a regular bases |
| re; toshibas | Hey guys, your english is great as far as I`m concerned, One thing
I forgot to mention is the color |